Engineering Technician
3.
2 Saint Augustine, FL Saint Augustine, FL $16.
70 - $26.
55 an hour $16.
70 - $26.
55 an hour SUMMARY Engineering technicians provide valuable support, allowing engineers to focus on more complex responsibilities.
If you're interested in a hands-on role within the engineering field, becoming an engineering technician could be a rewarding career choice! ESSENTIAL JOB DUTIES Designs new equipment and materials or recommends revision to methods of operation, material handling, equipment layout, and other changes to increase production and improve standards.
Tests selected products at specified stages in the production process for performance characteristics and adherence to specifications.
Compiles and evaluates statistical data to determine and maintain the quality and reliability of products.
Studies time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rates and improve efficiency.
Maintain a clean, organized work environment, and adhere to all safety standards, procedures, and regulations.
Other duties as required in support of the department and the company SUPERVISOR RESPONSIBILITIES While engineering technicians often start as support staff, there is room for career advancement.
ENVIRONMENTAL POLICY CarlisleIT is dedicated to identifying and reducing the environmental impact of its operations, activities, and products.
It is our commitment to comply with all applicable laws and other regulatory requirements concerning the environment.
We are committed to preventing pollution and continually improving our environmental performance in all our global operations.
This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing the environmental objectives and targets of CarlisleIT.
EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) technical data.
Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, or a Permanent Resident (Green Card Holder).
TRAVEL Approximately 10% of travel is expected.
Requirements:
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily.
The requirements listed below are representative of the knowledge, skill, and ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single requirement.
At CarlisleIT, we are dedicated to having a diverse and inclusive workplace, so if you're excited about this role but your experience doesn't align perfectly with every single qualification in the job description, we encourage you to apply regardless.
You may just be the right candidate for this or one of our other roles.
EDUCATION and EXPERIENCE High school diploma or general education degree (GED) required.
Requires technical skills usually obtained by post-secondary education from specialized training or equivalent experience.
1
years in manufacturing, industrial environment, or equivalent experience preferred.
CERTIFICATES, LICENSES, REGISTRATIONS Active IPC-WHMA-A-620 certification at the manager's discretion and may be specific to work location.
LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English.
Conversational in any other language preferred.
MATHEMATICAL SKILLS Interpret and analyze numerical data using statistical methods.
JOB SKILLS Computer Software:
Proficient in MS Office including Excel, Word, and SharePoint is necessary.
Knowledge of ERP systems, SAP preferred.
Practical Knowledge:
Practical knowledge of machines, production plants, and sites.
Technical Skills:
Understand equipment, systems, and processes.
Adaptability:
Learn many skills on the job.
Attention to Detail:
Accurate documentation and adherence to specifications are essential.
Collaboration:
Working closely with engineers and other team members.
Problem-solving:
Identifying and resolving issues efficiently.
Environment:
Understanding and experience in a Lean manufacturing environment.
Projects:
Participate in continuous improvement projects and 5S-related performance teams.
PHYSICAL DEMANDS The physical requirements outlined below are indicative of those necessary to fulfill the core responsibilities of this position.
Reasonable accommodations may be provided to enable individuals with disabilities to perform these tasks.
During performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel, as well as communicating verbally.
Additionally, the employee will frequently need to reach with hands and arms, while also standing and walking as part of the role.
Occasional lifting and movement of objects weighing up to 50 pounds may be required.
This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT Engineering technicians working in manufacturing plants typically find themselves in dynamic environments.
They are often stationed on the factory floor, where production processes take place.
The manufacturing setting can be noisy, especially near machinery and production lines.
Additionally, there may be dust generated during various manufacturing processes.
Some manufacturing processes involve the use of chemicals or materials that emit fumes.
Technicians may encounter these substances during their work.
PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas.
Clear ANSI Z87.
1 safety-rated glasses in specific areas.
Hearing protection, in specific locations.
Ability to compile with JSA in specific areas.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
2 Saint Augustine, FL Saint Augustine, FL $16.
70 - $26.
55 an hour $16.
70 - $26.
55 an hour SUMMARY Engineering technicians provide valuable support, allowing engineers to focus on more complex responsibilities.
If you're interested in a hands-on role within the engineering field, becoming an engineering technician could be a rewarding career choice! ESSENTIAL JOB DUTIES Designs new equipment and materials or recommends revision to methods of operation, material handling, equipment layout, and other changes to increase production and improve standards.
Tests selected products at specified stages in the production process for performance characteristics and adherence to specifications.
Compiles and evaluates statistical data to determine and maintain the quality and reliability of products.
Studies time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rates and improve efficiency.
Maintain a clean, organized work environment, and adhere to all safety standards, procedures, and regulations.
Other duties as required in support of the department and the company SUPERVISOR RESPONSIBILITIES While engineering technicians often start as support staff, there is room for career advancement.
ENVIRONMENTAL POLICY CarlisleIT is dedicated to identifying and reducing the environmental impact of its operations, activities, and products.
It is our commitment to comply with all applicable laws and other regulatory requirements concerning the environment.
We are committed to preventing pollution and continually improving our environmental performance in all our global operations.
This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing the environmental objectives and targets of CarlisleIT.
EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) technical data.
Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, or a Permanent Resident (Green Card Holder).
TRAVEL Approximately 10% of travel is expected.
Requirements:
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily.
The requirements listed below are representative of the knowledge, skill, and ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single requirement.
At CarlisleIT, we are dedicated to having a diverse and inclusive workplace, so if you're excited about this role but your experience doesn't align perfectly with every single qualification in the job description, we encourage you to apply regardless.
You may just be the right candidate for this or one of our other roles.
EDUCATION and EXPERIENCE High school diploma or general education degree (GED) required.
Requires technical skills usually obtained by post-secondary education from specialized training or equivalent experience.
1
years in manufacturing, industrial environment, or equivalent experience preferred.
CERTIFICATES, LICENSES, REGISTRATIONS Active IPC-WHMA-A-620 certification at the manager's discretion and may be specific to work location.
LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English.
Conversational in any other language preferred.
MATHEMATICAL SKILLS Interpret and analyze numerical data using statistical methods.
JOB SKILLS Computer Software:
Proficient in MS Office including Excel, Word, and SharePoint is necessary.
Knowledge of ERP systems, SAP preferred.
Practical Knowledge:
Practical knowledge of machines, production plants, and sites.
Technical Skills:
Understand equipment, systems, and processes.
Adaptability:
Learn many skills on the job.
Attention to Detail:
Accurate documentation and adherence to specifications are essential.
Collaboration:
Working closely with engineers and other team members.
Problem-solving:
Identifying and resolving issues efficiently.
Environment:
Understanding and experience in a Lean manufacturing environment.
Projects:
Participate in continuous improvement projects and 5S-related performance teams.
PHYSICAL DEMANDS The physical requirements outlined below are indicative of those necessary to fulfill the core responsibilities of this position.
Reasonable accommodations may be provided to enable individuals with disabilities to perform these tasks.
During performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel, as well as communicating verbally.
Additionally, the employee will frequently need to reach with hands and arms, while also standing and walking as part of the role.
Occasional lifting and movement of objects weighing up to 50 pounds may be required.
This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT Engineering technicians working in manufacturing plants typically find themselves in dynamic environments.
They are often stationed on the factory floor, where production processes take place.
The manufacturing setting can be noisy, especially near machinery and production lines.
Additionally, there may be dust generated during various manufacturing processes.
Some manufacturing processes involve the use of chemicals or materials that emit fumes.
Technicians may encounter these substances during their work.
PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas.
Clear ANSI Z87.
1 safety-rated glasses in specific areas.
Hearing protection, in specific locations.
Ability to compile with JSA in specific areas.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
